Water Purifier-Aquinity² P 10 Reagent View larger

Water Purifier-Aquinity² P 35 Reagent


MODEL: Aquinity² P 35 Reagent

P/N: 114-0050


More details




$10,270.68 per Purifier

WATER PURIFIER-Aquinity² P 35 Reagent


  • Permeate rate: 10 l/h
  • Resistivity: 18.2 MOhm x cm
  • Reservoir: 35 l or 70 l
  • Flow Rate UPW: 2 l/min
  • TOC
    < 10 ppb (Reagent)
    < 3 ppb (Analytical with UV)
    < 5 ppb (LifeScience with UV and UF)
  • Endotoxins: < 0.001 EU/ml endotoxins (LifeScience)

ModulesAquinity P 35 Reagent
Article number 114-0050
Water Quality
AAS yes
ICP yes
Low Level Applications yes
CE no
Cell Culture no
Gentics no
UV-Reactor no

UV-Reactor no
Ultrafiltration (UF) no
TOC-Display no
Ultra pure water cartridge 190-0088
Filter Sterile 190-0013
Installation-Kit N/A

Microsiemens feed water check N/A
memTAP Dispenser 180-0074
Feed water requirements
Water quality tap water less than 1400μS/cm
Temperature <20°C
Ultra pure Water (Type I)
Resistivity At 25°C 18,2 MΩ
Conductivity At 25μC 0,055μS
Flow Rate 2 l/min
TOC Level < 10 ppb
Endotoxin (Pyrogens) N/A
Particulate < 1/ml (>0.22μm)
Bacteria ≤ 1 cfu/10ml
High purified Water from RO or EDI
Conductivity At 25°C approx 10μS
TOC < 50 ppb
Production Rate 10l/h
Ionic Rejection 98%
Electrical Requirements
Electrical Voltage 100-230 V
Packing Information
Net Weight: 25kg with empty tank
Water tank 70l
External Dimensions (WxDxH in mm)
Main units 504 x 680 x 535


Aquinity² P35 version have an independent tank from which RO water can be tapped (e.g. for glassware cleaning).
The water quality from this tank depends on the feed water quality; in general the RO holds back 98% of all ions. The tank can be installed at the side or above the system or even underneath the bench.

Tapping of ultrapure water is done with our flexible but also lockable dispenser as incorporated in all membraPure ultrapure water systems. Built-in TOC monitoring is also available with the Aquinity² P35 versions.

Aquinity² models produce ultrapure water directly from municipal or potable tap water. In the next step Type I grade water is produced with a polisher cartridge. The Aquinity² P10 model is ideal for laboratories with a limited daily need for ultrapure water.

Advantages of the new system:

• Compact housing
• Big touchscreen
• Remote service module

• Menus and wizards easy to use and mistake avoiding
• New fixed and flexible dispenser
• Easy access for cartridge exchange

No customer reviews for the moment.

Write a review

Write a review